£400 + VAT per working drive, any CCTV recorderSend the drive, not the recorder · 5 working days · paid upfrontSwitch it off, then call:0800 6890668
CCTV·DRCCTV Data Recovery 0800 6890668 Send a drive
CCTV·DR / The recorder said / No recordings for that date

Playback calendar blank for the day · other days present · recorded over · never recorded · index damage · wrong date on the recorder's clock · £400 + VAT

No recordings for that date. Three explanations, and recovery helps with only one of them. Work out which before you pay.

The recorder starts, the cameras show, playback opens, and the day you need is blank. Days either side may be there. This is the hardest situation to advise on, because the screen looks the same whichever of three quite different things has happened. The footage may have been recorded and since overwritten by the loop. It may never have been recorded: the camera was off, the schedule excluded that time, or motion recording did not trigger. Or it may be on the disk but missing from the recorder's index after a fault. Only the third is recoverable. A few checks on the recorder narrow it down, and the drive itself decides it.

Binary image first, original untouchedAll video processed from the imageDrive only, not the recorder£400 + VAT per working drive, paid upfront

Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668

ON SCREEN● ALARM
No record file found
Typical wording; yours may differTypical playback message when no recording is indexed for the period chosen; wording varies by make and model

What can and cannot come back.

Can be recoveredVideo present on the disk but missing from playback
FromThe blocks themselves and the recorder's logs, read from a binary image
Cannot be recoveredA day that was overwritten or never recorded

Why it says that.

The third column is the question that matters most: if the recorder stopped recording when the message began, nothing after that point exists.

Likely causeHow to tellWas it still recording?What the bench does
Day is older than the oldest in the calendarRecorded overYes, over itConfirms the oldest surviving video; cannot go further back
One camera blank, others presentThat camera was offline or not scheduledNot on that channelLogs may show the camera's loss
Gaps at quiet timesMotion-only recording did not triggerOnly on motionNothing between triggers exists
A block of hours missing mid-archiveIndex damage or a bad area of diskYes, at the timeBlocks for that period looked for directly
Everything is an hour or a day outRecorder clock wrongYes, under the wrong timeFootage found at the recorder's time, not the true time
Blank since a certain dayDisk error or full disk from thenNoLast write date established

What to do, in order.

  1. Find the oldest and newest recorded daysIn the playback calendar, without changing settings. If your date is outside them, it is not there.
  2. Check the recorder's clockCompare the time on the live view with your phone. Note the difference and whether it is an hour out.
  3. Look at the other cameras for the same timeIf they have footage, the recorder was recording.
  4. Check how that camera was set to recordContinuous or motion, and its schedule. Look; do not alter.
  5. If the day is inside the range and still blank, stop and remove the driveThat is the pattern that suggests index damage.

Do not

  • Do not leave the recorder running while you decide; the loop keeps moving.
  • Do not 'rebuild' or 'repair' the database from the recorder's menu.
  • Do not change the clock; note the error instead.
  • Do not factory reset to see if playback improves.
  • Do not assume recovery can find what the recorder did not record.

The message, in more detail.

Recorded over

A looping recorder keeps a fixed quantity of video, and how many days that is depends on the drive, the number of cameras and their settings. On a typical eight-camera system with a 4 TB drive recording continuously at modest quality, a rough calculation gives a little over three weeks. One UK recovery firm's own example makes the point: 'if an incident occurred 24 days ago, this data will have already been overwritten and there is no chance of recovering it.' If the calendar's oldest day is later than the day you need, that is the position, and no laboratory can change it.

Never recorded

Recorders do what they are set to do. A camera set to record on motion keeps nothing when its motion detection is not triggered, and a person at the far edge of the picture at night may not trigger it. A schedule that records only outside business hours keeps nothing during them. A camera whose cable failed shows a blank channel. And a recorder with a disk error records nothing at all. The published research on the major formats notes that the recorder's own logs note events such as recording status changes; where those logs survive on the image, they often explain a gap precisely.

Recorded but not indexed

The recoverable case is the one where the video was written and the index entry for it was lost. A power cut, a bad sector under the index, or an interrupted shutdown can leave blocks of video on the disk that no index entry points to. Playback, which reads only the index, shows a gap. An examination of the image reads the blocks themselves and can find video for periods the recorder cannot list. The sign to look for is a gap in the middle of otherwise continuous footage, on all cameras at once, that begins or ends at a power cut or restart.

Sources
  1. Data Clinic, CCTV data recovery (the 24-day overwrite example) — www.dataclinic.co.uk/cctv-data-recovery/
  2. Han, Jeong and Lee, 'Analysis of the HIKVISION DVR File System', ICDF2C 2015 (Springer LNICST) — eudl.eu/pdf/10.1007/978-3-319-25512-5_13
  3. Dragonas, Lambrinoudakis and Kotsis, 'IoT forensics: Exploiting unexplored log records from the HIKVISION file system', J Forensic Sci 2023; 68:2002-2011 — doi.org/10.1111/1556-4029.15349
  4. 'Forensic recovery from multi-channel analog Dahua DVRs' (DHFS4.1), Information 2026, 17(5):493 — doi.org/10.3390/info17050493
  5. Lorex D861 series manual, troubleshooting table — www.lorextechnology.com/downloads/security-dvr/D861/Manual/WEB/EN/LX500961.xml.html

Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.

Asked about this message.

Playback is blank for my date. Can you recover it?

Only if it was recorded and is still on the disk. If it was recorded over or never recorded, no. The checks on this page help you judge which.

How do I know if it was recorded over?

If the oldest day in the playback calendar is later than the day you need, it has been.

Do I pay if it turns out it was never recorded?

Yes. £400 + VAT is for imaging and processing the drive, and is non-refundable.

Switched off. Drive out. Then tell us what happened.

Tell us the recorder, what happened and the date you need. The reply, inside a working day, says whether the footage is likely to be on the drive. Nothing is charged for that. Recovery is £400 + VAT per working drive, paid upfront and non-refundable; failing or damaged drives cost more and are quoted first.