Uniview / UNV NVRs and hybrid recorders · installer-fitted · disk error · no disk · formatted by the engineer · one drive in a multi-bay unit · £400 + VAT
Uniview. Usually fitted by an installer, which means the first person to see the fault is an engineer with a format button.
Uniview, sold as UNV, is the third large Chinese manufacturer and is fitted by UK installers who prefer it to the two best-known makes. Its recorders tend to be in shops, offices and small commercial sites. That changes how footage gets lost. The owner rarely touches the recorder; the installer is called to a disk fault, and the standard fix for a recorder with a disk fault is to format or replace the drive. If the fault appeared after an incident, ask the engineer to take the drive out and leave it with you. Uniview's on-disk format is less publicly documented than its rivals', so the layout is established from the image.
Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668
What can and cannot come back.
What you see, and what it means.
| What you see | What it usually means | What happens at the bench | Caveat |
|---|---|---|---|
| Disk error alarm | A failing or disconnected drive | Imaged outside the recorder | Recording stopped at the alarm |
| Engineer replaced the drive | The old drive may be in the engineer's van | Ask for it back the same day | Old drives are often reused or destroyed |
| Engineer formatted the drive | Structures rewritten | Old video searched for in the image | Recording resumed straight away |
| Two or more drives | Footage may span drives | £400 + VAT per drive; each drive imaged | One drive of several may not hold the day you need |
| Recorder replaced under warranty | The old unit went back with its drive | Nothing unless the drive is retrieved | Ask before the swap |
| Recorder dead | Hardware fault | Drive read in full | None |
Note down before you unplug it
- The model from the label (for example NVR302-08S).
- How many drives are fitted and which bay each was in.
- The installer's name and what they did, with dates.
- The date, time and cameras needed.
- The retention period the system was set up for, if known.
Do not
- Do not let the engineer format or initialise the drive.
- Do not let the old drive leave the premises.
- Do not keep recording to it.
- Do not mix up drives from a multi-bay unit.
- Do not send the recorder.
This recorder, in more detail.
Ask for the drive
On a maintained system, the conversation that saves the footage happens before the engineer arrives. Tell the installer that the recordings are needed and that the drive is not to be formatted, initialised or taken away. If the recorder needs a drive to work, have a new one fitted and keep the old one. Installers are generally glad to do it; their concern is a working system. A drive that has gone back to a supplier under warranty, or into another customer's recorder, is beyond anyone's reach.
An undocumented format
The published academic work on recorder file systems covers some makes in detail and others not at all. Uniview is in the second group in the research this site relies on. That does not make recovery impossible. The tools written for recorder drives support many formats their vendors have worked out without publishing, and video streams can be located by their own structure. It does mean the bench will not tell you in advance that times and channels will be preserved. You are told by email whether footage was recovered for the dates you gave.
Multi-bay recorders
Many commercial Uniview units have two, four or more drive bays. With more than one drive fitted, the recorder may fill them in turn or treat them as a single pool, and the day you need could be on any of them. The flat fee on this site is for a recorder with one drive. If yours has more, say how many and label each with its bay number as it comes out; the fee is £400 + VAT for each drive.
- Magnet Forensics, DVR Examiner release notes on file-system support (vendor) — www.magnetforensics.com/blog/stream_db_i_e4-filesystem-support-now-available-in-dvr-examiner-3-1-5/
- Magnet Forensics, Magnet Witness product page (vendor) — www.magnetforensics.com/products/magnet-witness/
- Rzayeva et al., 'Automated Forensic Recovery Methodology for Video Evidence from Hikvision and Dahua DVR/NVR Systems', Information 2025, 16(11):983 — www.mdpi.com/2078-2489/16/11/983
- ICO, guidance on video surveillance including CCTV: governance — ico.org.uk/for-organisations/uk-gdpr-guidance-and-resources/cctv-and-video-surveillance/guidance-on-video-surveillance-including-cctv/governance-post-deployment/
- SWGDE Best Practices for Computer Forensic Acquisitions v2.0 (image types, hashing, records to keep) — www.swgde.org/wp-content/uploads/2024/03/2023-06-15-SWGDE-Best-Practices-for-Computer-Forensic-Acquisitions-17-F-002-2.0.pdf
Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.
Asked about Uniview recorders.
The installer has already swapped the drive. Is it too late?
Not if the old drive can be got back unformatted. Ring them today.
Can you promise the times will be right?
No. On formats that are not publicly documented, it depends on what the tools can parse. You are told whether footage was recovered for your dates.
What does it cost?
£400 + VAT for a recorder with one drive, paid upfront and non-refundable. More drives are £400 + VAT each.
Switched off. Drive out. Then tell us what happened.
Tell us the recorder, what happened and the date you need. The reply, inside a working day, says whether the footage is likely to be on the drive. Nothing is charged for that. Recovery is £400 + VAT per working drive, paid upfront and non-refundable; failing or damaged drives cost more and are quoted first.