£400 + VAT per working drive, any CCTV recorderSend the drive, not the recorder · 5 working days · paid upfrontSwitch it off, then call:0800 6890668
CCTV·DRCCTV Data Recovery 0800 6890668 Send a drive
CCTV·DR / The recorder said / 'HDD Full' and it stopped recording

HDD Full · 0% free · 'the unit is no longer recording' · overwrite not enabled · live pictures but no recordings · check the last recorded date · £400 + VAT

'HDD Full' and it stopped recording. The cameras went on showing pictures. The recorder stopped keeping them on the day the drive filled.

Most recorders are set to overwrite: when the drive fills, the oldest footage makes way for the newest. Some are not. With overwrite off, a recorder fills its drive in a few weeks and then stops. The live view carries on as before, which is why this fault goes unnoticed until someone needs a recording and finds the newest is months old. For recovery this is the simplest case technically and often the most disappointing. The drive is normally in perfect order and holds a complete archive up to the day it filled. If your incident was after that day, there is nothing to recover, and you can usually establish that yourself for nothing.

Binary image first, original untouchedAll video processed from the imageDrive only, not the recorder£400 + VAT per working drive, paid upfront

Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668

ON SCREEN● ALARM
Hard drive is full (0%) and the unit is no longer recording.
Quoted from the makerLorex manual troubleshooting table, with the cause given as 'Overwrite is not enabled.' Hikvision manuals list 'HDD Full: The HDD is full.'

What can and cannot come back.

Can be recoveredA complete archive up to the day the drive filled
FromA binary image of a drive that was never overwritten
Cannot be recoveredA single frame from after recording stopped

Why it says that.

The third column is the question that matters most: if the recorder stopped recording when the message began, nothing after that point exists.

Likely causeHow to tellWas it still recording?What the bench does
Overwrite never switched onFull since weeks after installationNo, since it filledWhole archive extracted if wanted
Overwrite switched off after a resetWorked for years, then stoppedNo, since it filled againAs above
Overwrite on but failingReolink titles a page 'NVR HDD is Full And Cannot Overwrite'NoImage shows the last write
Recorder told to format to clear it'Format HDD after the backup of the video'Restarts after formatOld footage searched for
Old footage is what is wantedA historic incident, long since looped on other systemsn/aA full, never-overwritten drive is ideal
Playback will not openCannot check the datesUnknownThe recovered footage shows which dates exist

What to do, in order.

  1. Open playback, change nothingLook at the calendar. Days with recordings are marked. Note the newest marked day.
  2. Compare with the date you needIf the incident is later than the newest recording, it was not recorded.
  3. If it is earlier, back it up now if you canUse the recorder's export to a USB stick for the period you need, before anything else.
  4. Do not format to make roomFit a second drive or switch overwrite on only after the footage you need is safe.
  5. If playback or export fails, remove the driveThen recovery is the route, and the drive should be in good condition.

Do not

  • Do not format the drive to get recording going again before you have what you need.
  • Do not switch overwrite on first: the recorder will start replacing the oldest footage.
  • Do not pay for recovery of a date the recorder never recorded.
  • Do not assume live pictures mean it was recording.
  • Do not delete or reset anything from the app.

The message, in more detail.

Check before you pay

This is the one message where a customer can often answer their own question. The playback calendar on almost every recorder marks the days that have recordings. If the last marked day is in March and your incident was in June, the footage does not exist, on this drive or anywhere. This service would image the drive, process it, confirm that the newest video is from March and return what there is. The fee would be payable. It is better spent only if the calendar cannot be opened, or if what you want lies inside the period that was recorded.

When a full drive is good news

There is a case where 'HDD Full' is the best thing that could have happened. Because nothing was overwritten, the drive holds footage far older than a looping recorder would keep. A dispute about something that took place in the first weeks after installation, long ago, can sometimes be answered from a drive that filled and stopped, when any normally configured system would have recorded over it dozens of times. If old footage is what you need, do not touch the overwrite setting and do not format: export it or send the drive.

Why overwrite gets switched off

Sometimes it was never on: the installer or owner missed the setting. Sometimes a factory reset, done to clear a password or a fault, returned the recorder to defaults that differ from how it was set up. Sometimes a replacement drive was fitted and the storage settings were not revisited. The makers' pages treat a full drive as a housekeeping matter. Reolink's says 'Format HDD after the backup of the video.' That is the correct order. Backup first; and if the recorder will not let you back up, the drive should come out before any format is attempted.

Sources
  1. Lorex D861 series manual, troubleshooting table — www.lorextechnology.com/downloads/security-dvr/D861/Manual/WEB/EN/LX500961.xml.html
  2. Reolink support, 'NVR HDD is Full And Cannot Overwrite' — support.reolink.com/hc/en-us/articles/900002131203-NVR-HDD-is-Full-And-Cannot-Overwrite/
  3. Hikvision USA support, tips on hard disk settings on Hikvision recorders — supportusa.hikvision.com/support/solutions/articles/17000130208-do-you-have-any-tips-regarding-hard-disk-settings-on-hikvision-recorders-
  4. ICO, guidance on video surveillance including CCTV: governance — ico.org.uk/for-organisations/uk-gdpr-guidance-and-resources/cctv-and-video-surveillance/guidance-on-video-surveillance-including-cctv/governance-post-deployment/
  5. Han, Jeong and Lee, 'Analysis of the HIKVISION DVR File System', ICDF2C 2015 (Springer LNICST) — eudl.eu/pdf/10.1007/978-3-319-25512-5_13

Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.

Asked about this message.

The cameras were working. Why is there no recording?

Live view and recording are separate. With the drive full and overwrite off, the recorder shows pictures and keeps none.

Can anything be recovered from after it filled?

No. Nothing was written, so nothing is there.

Is the fee still charged if the date I need was never recorded?

Yes. £400 + VAT pays for imaging and processing the drive. Check the playback calendar first if you can.

Switched off. Drive out. Then tell us what happened.

Tell us the recorder, what happened and the date you need. The reply, inside a working day, says whether the footage is likely to be on the drive. Nothing is charged for that. Recovery is £400 + VAT per working drive, paid upfront and non-refundable; failing or damaged drives cost more and are quoted first.