Forgotten admin password · account locked · installer has gone · previous owner · factory reset · the password is not on the drive's video · £400 + VAT
Wrong password: locked out of the recorder. The password guards the recorder's menus. It does not guard the hard drive.
The installer set a password and left no note of it. The previous owner of the shop took it with him. A member of staff changed it and has gone. The recorder is recording, the cameras are fine, and nobody can open playback. This is an access problem, not a data problem, and it has two routes out. One is the maker's password-reset procedure, which on most current recorders does not touch the recordings. The other, when that is not possible or when a reset has already gone wrong, is to read the footage from the hard drive directly. The drive's video is not protected by the menu password, with one exception covered below.
Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668
User name or password is wrong. Account locked.
What can and cannot come back.
Why it says that.
The third column is the question that matters most: if the recorder stopped recording when the message began, nothing after that point exists.
| Likely cause | How to tell | Was it still recording? | What the bench does |
|---|---|---|---|
| Password forgotten, recorder still recording | Lock-out screen only | Yes, and looping | If an incident is on it, time matters: the loop is still running |
| Account locked after wrong attempts | A timed lock | Yes | Wait it out before trying a known password again |
| Maker's reset available | Reset file or code from the maker or installer | Unaffected | Try this first if no incident is at risk |
| Factory default button used | Settings returned to default | May stop or change | Drive read directly if recordings have gone |
| Second-hand recorder | Bought with a password on it | Possibly | Footage belongs to someone else; see the note |
| Stream encryption enabled | A separate key was set for recordings | Yes | Key required; ask whoever set it |
What to do, in order.
- Decide whether anything on it is at riskIf an incident happened recently, the loop is counting down while you look for the password.
- If so, switch off and take the drive outThe footage is recovered from the drive. The password can be sorted out afterwards.
- If not, use the maker's password resetThrough the maker's support or your installer. Confirm it resets the password only.
- Avoid the factory-default routeUnless you are certain what it does on your model.
- Write the new password downAnd where the overwrite and schedule settings are, in case a reset changes them.
Do not
- Do not factory reset a recorder holding footage you need.
- Do not keep guessing; lock-outs lengthen.
- Do not follow a video for a different model.
- Do not let the loop run for days while the password is chased.
- Do not ask us to recover footage from a recorder that is not yours to authorise.
The message, in more detail.
What the password protects
The admin password is checked by the recorder's software when someone tries to open a menu. It is stored in the recorder's settings. The video on the hard drive is written in the recorder's format without reference to it. That is why tools built for reading recorder drives can do so with no password: one vendor's description says its product recovers video directly from the drive, bypassing the recorder's password. For an owner locked out of their own system, this means the footage is not hostage to the password.
Reset or default
Makers distinguish between resetting a password and restoring the recorder to factory defaults, and owners often do not. A password reset, done with a file or code issued by the maker against the unit's serial number, changes the password and nothing else. A factory default returns every setting to how it left the factory: recording schedules, motion settings, overwrite, camera names, the clock's time zone. The recordings are not necessarily erased, but the recorder may now record differently, or not at all, and some models offer a format as part of the process. Where footage matters, take the drive out before any default is attempted.
Whose footage it is
A recorder acquired with a building, or bought second-hand, may hold another person's recordings. This service recovers footage for the person entitled to it: the owner of the system, or someone acting with the owner's authority. The form asks. Footage of identifiable people is personal data, and what is done with it is the responsibility of whoever controls it; the Information Commissioner's Office publishes guidance for both businesses and householders. If you are unsure whether the footage is yours to recover, ask a solicitor before sending the drive.
- Magnet Forensics, Magnet Witness product page (vendor) — www.magnetforensics.com/products/magnet-witness/
- Han, Jeong and Lee, 'Analysis of the HIKVISION DVR File System', ICDF2C 2015 (Springer LNICST) — eudl.eu/pdf/10.1007/978-3-319-25512-5_13
- ICO, guidance on video surveillance including CCTV: governance — ico.org.uk/for-organisations/uk-gdpr-guidance-and-resources/cctv-and-video-surveillance/guidance-on-video-surveillance-including-cctv/governance-post-deployment/
- ICO, home CCTV systems — ico.org.uk/for-the-public/home-cctv-systems/
- Computer Misuse Act 1990, section 17 (interpretation: when access is unauthorised) — www.legislation.gov.uk/ukpga/1990/18/section/17
Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.
Asked about this message.
Can you recover footage without the recorder's password?
Yes. The video is read from the drive directly.
Will a factory reset delete my recordings?
Not always, but it can change how the recorder records and may offer a format. Remove the drive first if the footage matters.
What does it cost?
£400 + VAT for one drive, paid upfront and non-refundable.
Switched off. Drive out. Then tell us what happened.
Tell us the recorder, what happened and the date you need. The reply, inside a working day, says whether the footage is likely to be on the drive. Nothing is charged for that. Recovery is £400 + VAT per working drive, paid upfront and non-refundable; failing or damaged drives cost more and are quoted first.