£400 + VAT per working drive, any CCTV recorderSend the drive, not the recorder · 5 working days · paid upfrontSwitch it off, then call:0800 6890668
CCTV·DRCCTV Data Recovery 0800 6890668 Send a drive
CCTV·DR / Can it be recovered? / Multi-disk and RAID recorders

2, 4, 8 or 16 bays · drives filled in turn · RAID 5 · degraded array · do not rebuild · number every drive · all of them, in order · £400 + VAT per drive

Multi-disk and RAID recorders. Yes, and it is a bigger job. The footage is spread over every drive in the box, and every drive has to come.

Larger recorders hold two, four, eight or more hard drives. They use them in one of two ways. Most simply fill the drives one after another, treating them as one long reel, so that a given day may sit on drive two this month and drive three the next. Others combine the drives into a RAID array, in which every piece of video is split across all of them with redundancy. In neither case is one drive the 'CCTV drive'. A recovery needs the complete set, each identified by the bay it came from, and involves imaging every one. For that reason the fee is charged per drive: £400 + VAT for each one in the recorder. Nearly all CCTV systems have a single drive, so this affects few customers.

Binary image first, original untouchedAll video processed from the imageDrive only, not the recorder£400 + VAT per working drive, paid upfront

Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668

Multi-disk and RAID recorders: can it be recovered?Yes

Multi-drive recorders can be recovered. All the drives are needed, and the fee is £400 + VAT for each drive.

What can and cannot come back.

Can be recoveredFootage spread across several drives, sequentially or in an array
FromA binary image of every drive and reconstruction of the set from the images
Cannot be recoveredArrays that were re-initialised and recorded over, or sets with too many drives missing

Case by case.

CaseRecoverable?WhyWhat decides it
Two to eight drives, filled in turn, one failedYes, for what the others hold; often the failed one tooEach drive is largely self-containedWhich drive held the date
RAID 5, one drive failedYesThe array is designed to survive itNo rebuild attempted on site
RAID 5, two drives failedOftenDepends on reading at least one of the failed drivesCondition of the failed drives
Array rebuilt on to a wrong or stale driveSometimesA rebuild writes across the whole arrayHow far it ran
Array re-created or initialisedSometimesAs for a format, across all drivesRecording since
Drives removed without labelsYes, with more workOrder has to be worked out from the dataNothing lost; time added

What it depends on.

How the recorder used its drives

Sequential or RAID. The recorder's storage menu says which; so does the model's manual.

Whether every drive is available

A sequential set can be recovered drive by drive. A RAID needs all but one, or all but two, depending on the level.

What was done after the fault

A forced rebuild or a re-initialise does more damage than the original failure.

The drives themselves

Hikvision's own FAQ notes that its RAID modes require enterprise-class drives. Arrays built on desktop or surveillance drives fail in less orderly ways.

In more detail.

One reel on many spools

A recorder with several drives and no RAID treats them as a single stretch of storage. It records to the first until it is full, moves to the second, and so on, returning to the first when the last is full. Some makers add groups or quotas that assign particular cameras to particular drives. The practical effect is that nobody outside the recorder knows which drive holds a given day. Each drive carries its own structures and can usually be read on its own, which is good news when one has failed: the others are unaffected. But finding a date means examining the set.

RAID in recorders

Higher-capacity NVRs offer RAID, usually level 5 or 6, so that the failure of one drive, or two, does not stop recording or lose footage. The array then carries the recorder's file system on top. Recovery means imaging every member, working out the array's geometry, assembling a virtual copy of the array from the images, and only then reading the recorder's format from that. The dangerous moment is not the first drive failure, which the array is built for, but what is done next: a rebuild started on a second marginal drive, or an array 're-created' from the menu, can turn a degraded array into a destroyed one.

Before you call

Power the recorder down. Label each drive with its bay number as you remove it, counting from the label on the chassis or, failing that, left to right, and write down which way you counted. Note the recorder's make and model, the number of bays, the size of the drives, whether the storage menu said RAID, and what messages were shown. Then ring or use the form. The cost is £400 + VAT for each drive. As with single drives it is payable upfront and is not refunded, and the terms are sent with the pro forma invoice.

Sources
  1. Hikvision video recorders FAQ (mirrored by DVRAID): RAID needs enterprise drives — www.dvraid.com/how-to/hikvision-video-recorders-faq/
  2. Han, Jeong and Lee, 'Analysis of the HIKVISION DVR File System', ICDF2C 2015 (Springer LNICST) — eudl.eu/pdf/10.1007/978-3-319-25512-5_13
  3. SWGDE Best Practices for Computer Forensic Acquisitions v2.0 (image types, hashing, records to keep) — www.swgde.org/wp-content/uploads/2024/03/2023-06-15-SWGDE-Best-Practices-for-Computer-Forensic-Acquisitions-17-F-002-2.0.pdf
  4. Western Digital, WD Purple surveillance hard drives — www.westerndigital.com/en-sg/products/internal-drives/wd-purple-sata-hdd
  5. Magnet Forensics, DVR Examiner release notes on file-system support (vendor) — www.magnetforensics.com/blog/stream_db_i_e4-filesystem-support-now-available-in-dvr-examiner-3-1-5/

Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.

Asked about this.

What does a recorder with four drives cost?

£400 + VAT per drive, so four fees. Every drive has to be imaged.

Can I send just the drive that failed?

No. Send every drive, each labelled with its bay number.

The recorder is offering to rebuild the array. Should I let it?

Not if the footage matters. Power down and remove the drives.

Switched off. Drive out. Then tell us what happened.

Tell us the recorder, what happened and the date you need. The reply, inside a working day, says whether the footage is likely to be on the drive. Nothing is charged for that. Recovery is £400 + VAT per working drive, paid upfront and non-refundable; failing or damaged drives cost more and are quoted first.