£400 + VAT per working drive, any CCTV recorderSend the drive, not the recorder · 5 working days · paid upfrontSwitch it off, then call:0800 6890668
CCTV·DRCCTV Data Recovery 0800 6890668 Send a drive
CCTV·DR / Stop the recorder now

Stop the recorder now · it is overwriting its oldest footage this minute · power off · drive out · new drive in if the cameras must run · ten minutes

Stop the recorder now. The single most useful thing anyone can do for lost CCTV footage costs nothing and takes ten seconds: switch it off.

A recorder that is running is recording, and one that is recording is erasing something older to make room. If it has been formatted or reset, the footage you want is what it is erasing. If it has not, it is still eating towards the date you need. A recorder in error is not recording, but every restart and every menu visit is a chance to press the wrong button. In all of these the right first move is the same, and it comes before reading the rest of this site.

Binary image first, original untouchedAll video processed from the imageDrive only, not the recorder£400 + VAT per working drive, paid upfront

Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668

Whatever the screen says, do not

  • Do not press Format, Init, Initialise, Rebuild or Repair.
  • Do not factory reset the recorder.
  • Do not update its firmware.
  • Do not leave it running 'until Monday'.
  • Do not disable recording in the menu instead of switching off: schedules resume.
  • Do not put the drive in a PC or another recorder to look.
  • Do not film the monitor with a phone as a substitute for the footage.
  • Do not let the engineer 'get it working' with the old drive in place.

Eight steps, in order.

  1. Switch it off at the wallPull the power lead or switch off the socket. Do not look for a shutdown option in the menu. Losing a few seconds to an abrupt stop matters less than a wrong click.
  2. Write down the timeThe date and time you switched it off, and the time shown on the recorder's own clock if you saw it. The difference between the two matters later.
  3. Note what the screen saidAny message, and the hard drive's status if it was displayed. A phone photograph taken before switching off is ideal; do not switch it back on to take one.
  4. Take the hard drive outSo the recorder cannot be switched back on with it by someone else. The next page shows how.
  5. If the cameras must keep recording, fit a new drivePut a new surveillance-rated drive in the recorder, switch on, and initialise the new drive when asked. The old one stays out.
  6. Label the old drive and put it somewhere safeRecorder make and model, date removed, your name. Somewhere dry, away from magnets and from anyone tidying up.
  7. If a crime is involved, tell the policeSay that the drive has been secured and ask whether they want it.
  8. Then tell us what happenedBy the form or by phone.

Already formatted, reset or left running?

If the recorder has already been formatted, reset or left running, none of that is a reason to give up, and all of it is a reason to switch off now. Tell us what was done and when. Most drives that arrive have had something done to them.

Why minutes matter.

The loop

A typical recorder holds between two and six weeks. Each day it runs, a day at the far end is lost.

After a format

New recording starts at the beginning of the disk, over the oldest footage first, and works forward every hour.

A failing drive

Every hour of running wears a failing drive further. What can be read today may not be readable next week.

Other hands

A recorder with its drive in place can be reset, formatted or 'fixed' by the next person to find it beeping.

Sources
  1. Han, Jeong and Lee, 'Analysis of the HIKVISION DVR File System', ICDF2C 2015 (Springer LNICST) — eudl.eu/pdf/10.1007/978-3-319-25512-5_13
  2. Hikvision USA support, 'Audible Warning is saying there is a HDD error' — supportusa.hikvision.com/support/solutions/articles/17000128918-audible-warning-is-saying-there-is-a-hdd-error
  3. NPCC, Framework for Video Based Evidence v3.1 (2022) — library.college.police.uk/docs/NPCC/Framework-Video-Evidence-v3.1-2022.pdf
  4. ACPO Good Practice Guide for Digital Evidence, Version 5 (the four principles; handling a computer found on or off) — training-on-eppo.era.int/EPPO/kiosk/pdf/ACPO_Good_Practice_Guide.pdf
  5. Data Clinic, CCTV data recovery (the 24-day overwrite example) — www.dataclinic.co.uk/cctv-data-recovery/

Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.

Asked in the first ten minutes.

The premises need the cameras. Can I leave it on?

Not with the drive that holds the footage. Fit a new drive and let the recorder record to that.

It is only showing an error, not recording. Is there any hurry?

Less, but switch it off anyway. The danger now is someone formatting it to clear the error.

Should I shut it down properly from the menu?

No need. Switching off at the wall is fine and avoids the menus.

Switched off. Drive out. Then tell us what happened.

Once the drive is out, nothing more can be lost. Then use the form. The reply comes inside a working day and costs nothing.