£400 + VAT per working drive, any CCTV recorderSend the drive, not the recorder · 5 working days · paid upfrontSwitch it off, then call:0800 6890668
CCTV·DRCCTV Data Recovery 0800 6890668 Send a drive
CCTV·DR / How the recovery works

How the recovery works · seven stages · a binary image first · all video processed from the image · the original never written to · the image kept five days

How the recovery works. The drive is copied once, whole, and never worked on again. Everything after that happens to the copy.

The method is the same for every drive, and it is the reason for the flat fee. A binary image is a copy of the drive made sector by sector, with no attempt to understand the contents: whatever is at each position on the drive is at the same position in the image, whether it is video, index, free space or the remains of something older. All the video is then processed from that image. The original drive is read once and is not changed by anything that follows. There are seven stages, and one point, before you pay, at which you are told what is realistic and can stop.

Binary image first, original untouchedAll video processed from the imageDrive only, not the recorder£400 + VAT per working drive, paid upfront

Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668

Seven stages.

What it costs →
No.StageWho acts
1You tell us what happenedBy the form or by phone: the recorder, what it said, what was done, the date you need and the date it was switched off. Nothing is charged for this.You
2We tell you what is realisticWhether the footage is likely to be on the drive, likely to have been recorded over, or impossible to say without the image. If you want to go ahead, you are sent the terms and a pro forma invoice. The terms state that all CCTV work is paid upfront and is non-refundable.Us
3You send the drive and payThe drive, removed from the recorder, to the address you are given or to a receiving counter. Work starts when both the drive and payment have arrived.You
4The drive is logged and assessedIts make, model, serial number and condition are recorded. A drive that clicks, has been wet or has taken a blow is assessed before any power is applied. If it needs work before it can be read, you are quoted the extra cost and time first and decide whether to go ahead; the standard fee is for a working drive.Us
5A binary image is madeEvery sector is copied to an image file through equipment that does not write to the drive. Areas a failing drive cannot read at first are returned to.Us
6All video is processed from the imageThe recorder's format is identified. Where its index is intact, the video is extracted through it. Where the index is missing, reset or damaged, the video is located directly by its own markers, validated, and put in order from the channel and time held with each block or frame.Us
7Results, footage and drive come backYou are emailed whether footage was recovered from the date range you asked for. The footage, as standard video files by camera and date, is delivered by a free download link for up to 100 GB, or backed up to an external drive at extra cost. Your original drive is returned as it arrived. The image is kept for five days and then destroyed.Us

The method, in more detail.

Why an image, and not the drive

Three reasons. Safety: a failing drive may have few working hours left, and they should be spent copying it once, not searching it repeatedly. Integrity: nothing done to an image can alter the original, so a wrong approach can be abandoned and another tried on a fresh copy. Completeness: an image contains everything, including video the recorder's index no longer points to, the area before the recorder's own structures, and the boundary between old and new recording. Published good practice for digital evidence says the same thing in its first principle: do not change the data you may later rely on.

Reading a recorder's format

Recorders do not use the file systems computers do. The most widely sold make uses a layout that researchers took apart in 2015: a signed master sector, logs, an index, and the video in large fixed blocks. The other major make uses a different one, also now described in published work, in which frames carry their own markers. Forensic tools exist that read these and many others, and their makers acknowledge variants they do not yet support. For those, and for unbranded recorders, the video is recovered by recognising the frames themselves. What can be rebuilt beyond the pictures, such as camera labels, depends on the format.

What you are told, and what you do next

The email says whether footage was recovered from the date range you asked for. It is not a report, and it does not list what each camera holds. The footage is returned arranged by camera and date, and going through it to find the incident is for you: you know what you are looking for and nobody here does. Times on the footage are the recorder's own clock, so allow for a clock that was wrong.

What you can do with it

The footage is yours. You can give it to your insurer, your solicitor or the police, and tell them how it was obtained. No formal report or expert's report is produced, and nobody from this service attends court or a tribunal. If your matter needs expert evidence, an expert can be instructed separately and can be given the footage, or the image if you ask for a copy within five days of delivery.

Sources
  1. ACPO Good Practice Guide for Digital Evidence, Version 5 (the four principles; handling a computer found on or off) — training-on-eppo.era.int/EPPO/kiosk/pdf/ACPO_Good_Practice_Guide.pdf
  2. SWGDE Best Practices for Computer Forensic Acquisitions v2.0 (image types, hashing, records to keep) — www.swgde.org/wp-content/uploads/2024/03/2023-06-15-SWGDE-Best-Practices-for-Computer-Forensic-Acquisitions-17-F-002-2.0.pdf
  3. Han, Jeong and Lee, 'Analysis of the HIKVISION DVR File System', ICDF2C 2015 (Springer LNICST) — eudl.eu/pdf/10.1007/978-3-319-25512-5_13
  4. Rzayeva et al., 'Automated Forensic Recovery Methodology for Video Evidence from Hikvision and Dahua DVR/NVR Systems', Information 2025, 16(11):983 — www.mdpi.com/2078-2489/16/11/983
  5. Magnet Forensics, DVR Examiner release notes on file-system support (vendor) — www.magnetforensics.com/blog/stream_db_i_e4-filesystem-support-now-available-in-dvr-examiner-3-1-5/
  6. Sleuth Kit forum, 'Support for DHFS file system' (forum thread) — sleuthkit.discourse.group/t/support-for-dhfs-file-system-or-unknown-file-system/2006

Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.

Asked about the method.

Can I stop after stage 2?

Yes, at no cost. Nothing is charged until you have had the terms and chosen to pay.

Do you need the recorder or its password?

No. Only the drive.

Is my original drive changed?

No. It is read, not written to, and returned as it arrived.

What format is the footage returned in?

Standard video files that play on an ordinary computer, arranged by camera and date. Where the recorder's own native files can also be produced, they are included.

What happens to the image afterwards?

It is kept for five days after delivery so a further copy can be made if you ask, then destroyed.

Switched off. Drive out. Then tell us what happened.

Tell us the recorder, what happened and the date you need. The reply, inside a working day, says whether the footage is likely to be on the drive. Nothing is charged for that. Recovery is £400 + VAT per working drive, paid upfront and non-refundable; failing or damaged drives cost more and are quoted first.