£400 + VAT per working drive, any CCTV recorderSend the drive, not the recorder · 5 working days · paid upfrontSwitch it off, then call:0800 6890668
CCTV·DRCCTV Data Recovery 0800 6890668 Send a drive
CCTV·DR / Removing the hard drive

Removing the hard drive · a cross-head screwdriver · four to eight screws · two leads · ten minutes · send the drive, not the recorder

Removing the hard drive. Every recorder is a metal box with a hard drive screwed to the floor of it. Getting it out needs one screwdriver and no experience.

We ask for the drive and not the recorder for three reasons. A drive on its own travels more safely than one bolted inside a heavy box. A recorder cannot then be switched on in transit or on arrival with your drive in it. And the recorder is not needed: its settings, its password and its software play no part in reading the drive. If you have never opened a piece of equipment before, this is a gentle place to start. If you would sooner not, any CCTV installer, computer shop or handy neighbour can do it in a few minutes.

Binary image first, original untouchedAll video processed from the imageDrive only, not the recorder£400 + VAT per working drive, paid upfront

Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668

You need

  • A medium cross-head (Phillips) screwdriver
  • A phone, to photograph each stage
  • A pen and a sticky label
  • An anti-static bag, or a clean paper envelope if you have none

Do not

  • Do not open the hard drive itself. Its own lid is sealed and must stay so.
  • Do not remove the drive's circuit board.
  • Do not work on the recorder with the power lead in.
  • Do not prise at connectors with a screwdriver.
  • Do not stack things on the drive or put it down hard.
  • Do not post the recorder's power adapter, remote or mouse. They are not needed.

Ten steps, about ten minutes.

  1. Switch off and unplug everythingPower lead first. Then the camera, network and monitor cables; photograph the back before you unplug so they go back in the same places.
  2. Wait a minuteSo the drive has stopped spinning before the recorder is moved.
  3. Remove the lidMost lids are held by two screws on each side and one or two at the back. Take them out, slide the lid back about a centimetre, and lift.
  4. Find the driveA flat metal block about the size of a paperback, 10 cm by 15 cm, usually with a white or coloured label naming Western Digital, Seagate or Toshiba and a capacity in TB. Small recorders may hold a slimmer laptop-size drive.
  5. Photograph it in placeIncluding the two leads. If there is more than one drive, stop here and number them: stick a label on each with its position.
  6. Unplug the two leads from the driveA flat data lead, usually red or blue, and a wider power lead. Pull each straight back by its plug, not by the wires.
  7. Undo the drive's screwsUsually four, through the floor of the recorder from underneath, or through a bracket at the sides. Support the drive with one hand as the last screw comes out.
  8. Lift the drive out by its edgesDo not touch the circuit board on its underside. Put it down gently on something soft.
  9. Label itYour name, the recorder's make and model, the date. Not on the circuit board.
  10. Bag it and keep the recorderInto an anti-static bag or a paper envelope. Put the screws inside the recorder and refit the lid.

If your recorder looks different.

Compact home kits

A small plastic or thin metal case, often with only four screws underneath. The drive may be a slim 2.5-inch one.

Rack-width business recorders

A wide metal case with a sliding lid and two to eight drive positions on a tray. Number every drive.

Front-loading bays

Some NVRs have a hinged front panel with drives in caddies. Unlock, pull each caddy, number it. Send the drives in their caddies.

PC-based recorders

An ordinary computer case. There may be a small system drive as well as one or more large video drives. Send them all, labelled.

Cameras with memory cards

A microSD slot behind a small cover on the camera. Press the card to release it. Note which camera it came from.

Whole recorders are accepted only in exceptional circumstances, such as a drive that fire, flood or impact has made impossible to free, and only by agreement beforehand. Removing the hard drive is then charged extra. Say so on the form.

Sources
  1. Hikvision USA support, 'What do I do after I install a new hard drive?' — supportusa.hikvision.com/support/solutions/articles/17000129501-what-do-i-do-after-i-install-a-new-hard-drive-
  2. SWGDE Best Practices for Computer Forensic Acquisitions v2.0 (image types, hashing, records to keep) — www.swgde.org/wp-content/uploads/2024/03/2023-06-15-SWGDE-Best-Practices-for-Computer-Forensic-Acquisitions-17-F-002-2.0.pdf
  3. ACPO Good Practice Guide for Digital Evidence, Version 5 (the four principles; handling a computer found on or off) — training-on-eppo.era.int/EPPO/kiosk/pdf/ACPO_Good_Practice_Guide.pdf
  4. Western Digital, WD Purple surveillance hard drives — www.westerndigital.com/en-sg/products/internal-drives/wd-purple-sata-hdd

Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.

Asked about removing the drive.

Will removing the drive lose anything?

No. The footage is on the drive, and unplugging it changes nothing on it.

Will the recorder work without it?

It will show live pictures and report that it has no disk. It will not record until a drive is fitted.

I am not confident doing this. What then?

Ask a CCTV installer or a computer repair shop. Tell them not to power the recorder up or connect the drive to anything.

Switched off. Drive out. Then tell us what happened.

Drive out and labelled? The next page is where to send it.