Live pictures, no recordings · disk error for months · full and stopped · motion did not trigger · schedule · camera offline · nothing to recover
Footage that was never recorded. No. A recovery finds what was written to the disk. It cannot find what the recorder watched and let go.
A CCTV system does two separate things. It shows pictures, and it records them. The first can continue perfectly while the second has stopped, and from the monitor or the phone app there is often no sign of the difference. People discover it when they go looking for an incident and find that the recorder kept nothing that day, that week, or since last spring. This is the second of the two answers on this site that is a flat no. If the video was never written to the drive, no examination of the drive will produce it. What an examination can do is establish the fact, and often the reason.
Switch the recorder off first. Then tell us the make, what happened and the date you need: we say what is realistic before you pay anything
0800 6890668
Nothing was written, so nothing is there. An image can establish that it was not recorded, and usually why.
What can and cannot come back.
Case by case.
| Case | Recoverable? | Why | What decides it |
|---|---|---|---|
| Recorder in HDD error since an earlier date | No | Writes were failing | Date the error began |
| Drive full, overwrite off | No | Recorder stopped when full | Date it filled |
| Motion-only; no trigger | No | No motion event, no recording | Sensitivity, zones, distance, lighting |
| Outside the recording schedule | No | Recorder told not to record then | The schedule |
| Camera offline or cable fault | No, on that channel | No signal to record | Other channels may have it |
| New drive never initialised | No | Recorder could not use it | Since the drive was fitted |
What it depends on.
A blank day inside otherwise continuous footage may be an index fault, which is recoverable. A blank since a fixed date usually is not.
One camera's failure leaves the others. Another camera may have caught enough.
Continuous recording has no gaps of its own making. Motion recording has gaps by design.
What your system missed, a neighbour's or a shop's may have kept, for as long as their loop allows.
In more detail.
Live view is not recording
The pictures on the monitor come straight from the cameras through the recorder to the screen. Recording is a second path, from the cameras to the hard drive. A fault on the second path does not disturb the first. So a recorder with a dead drive, a full drive, or recording switched off goes on showing every camera, and the app goes on connecting. The only indications are a status icon that few people know to look for, a beep that is easily muted, and an empty playback calendar. Milesight's support pages have an article simply titled 'NVR failed to record'; every maker has its equivalent.
Motion recording and its gaps
Recording only on motion multiplies retention and is the default on many kits. It also means the recorder decides, frame by frame, whether anything is happening. Detection is tuned to avoid false alarms from rain, insects and headlights, and what is tuned out is sometimes a person at a distance, at night, moving slowly or in a part of the picture excluded from the detection zone. Where a camera has footage either side of an incident but not the incident, this is the usual reason. Nothing was written in between, and there is nothing in between to recover.
Why an image can still be worth having
For an owner who only wants the footage, a finding of 'never recorded' is money spent on bad news, and the checks on this site are there to avoid it. For an insurer, a solicitor or an employer, the same finding has value: it fixes, from the drive itself, the last time the system recorded and what it was doing at the time in question. Where the recorder's logs survive on the image they often give the cause and the date. The fee is the same in either case and is not refunded, so decide which kind of customer you are before sending.
- Milesight support, 'NVR failed to record' — support.milesight.com/support/solutions/articles/69000860504--nvr-record-nvr-failed-to-record
- Lorex D861 series manual, troubleshooting table — www.lorextechnology.com/downloads/security-dvr/D861/Manual/WEB/EN/LX500961.xml.html
- Hikvision USA support, tips on hard disk settings on Hikvision recorders — supportusa.hikvision.com/support/solutions/articles/17000130208-do-you-have-any-tips-regarding-hard-disk-settings-on-hikvision-recorders-
- Dragonas, Lambrinoudakis and Kotsis, 'IoT forensics: Exploiting unexplored log records from the HIKVISION file system', J Forensic Sci 2023; 68:2002-2011 — doi.org/10.1111/1556-4029.15349
- Reolink support, 'NVR HDD is Full And Cannot Overwrite' — support.reolink.com/hc/en-us/articles/900002131203-NVR-HDD-is-Full-And-Cannot-Overwrite/
Quotations were checked against the sources listed in November 2026. Makers change their support pages and manuals; follow the links for the current wording. Research figures are the authors' results on their own drives. No maker, regulator or police body listed is connected with this site.
Asked about this.
The cameras were on. Why is there no footage?
Showing pictures and recording them are separate. The recorder can do the first while failing at the second.
Can footage that was never recorded be recovered?
No. There is nothing on the drive to recover.
Can you tell me why it was not recording?
Not as part of this service. You are told whether footage was recovered for your dates, and the footage that does exist shows when the recorder stopped. The fee of £400 + VAT applies and is non-refundable.
Switched off. Drive out. Then tell us what happened.
Tell us the recorder, what happened and the date you need. The reply, inside a working day, says whether the footage is likely to be on the drive. Nothing is charged for that. Recovery is £400 + VAT per working drive, paid upfront and non-refundable; failing or damaged drives cost more and are quoted first.